28
2025
-
06
How to replace the car rearview mirror assembly?
How to replace the exterior rearview mirror assembly
Category：
NEWS
Author:
To replace the car rearview mirror assembly, follow these steps:
First, pry a small gap by hand, then insert a long screwdriver into it, carefully prying all snaps. Next, you will see three fixing screws. Please unplug the power connector first and remove these three screws. In this way, the rearview mirror assembly can be removed.
When removing the lens, you need to put your fingers around the lens, where there is a circle of snaps. Turn out slightly hard. When you hear a click, it means that the lens has been removed successfully.
Finally, install the new rearview mirror assembly back in the reverse order and steps.
When replacing the car's rearview mirror assembly, please pay attention to the following things to ensure the process is safe and smooth:
1. Be sure to turn off the power before replacing it to avoid short circuit or electric shock.
2. Treat the lens carefully to avoid scratches or damage.
3. When installing the new rearview mirror assembly, make sure all parts are aligned and securely installed.
Follow the above steps and precautions and you can easily replace the car's rearview mirror assembly.
Key words:
Related news
undefined
ONLINE MESSAGE
*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.
Room 518, Building A, No. 51, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen City, Guangdong Province, PRC. 518000
Powered by：
